2. PRINTER SETUP ENGLISH VERSION EO1-33114
2.5 Turning the Printer ON/OFF
20
2.4 Connecting the
Cables to Your
Printer
The following paragraphs outline how to connect the cables from the
printer to your host computer, and will also show how to make cable
connections to other devices. Depending on the application software
you use to print labels, there are 4 ways to connect the printer to your
host computer. These are:
An Ethernet connection using the printer’s standard LAN
connector.
A USB cable connection between the printer’s standard USB
connector and your host computer’s USB port. (Conforming to
USB 2.0)
A serial cable connection between the printer’s RS-232 serial
connector and one of your host computer’s COM ports.
A parallel cable connection between the printer’s optional parallel
connector and your host computer’s parallel port (LPT).
For details, refer to APPENDIX 2.
Serial Port
USB Port
Parallel Port (Option)
LAN Port
USB Host Port
(Option)
Expansion I/O (Option)
Power inlet
To Next Page
Loading...
Need help?
General
