3. MAINTENANCE ENGLISH VERSION EO1-33114
3.1 Cleaning
24
3.1.3 Optional Cutter Module
The disc cutter are available as an option.
1. Loosen the two Plastic Head Screws to remove the Cutter
Cover.
2. Remove the jammed paper.
3. Clean the Cutter with a soft cloth slightly moistened with
alcohol.
4. Attach the Cutter Cover.
Cutter Unit
Plastic Head Screw
WARNING!
1. Be sure to turn the power
off before cleaning the
Cutter Module.
2. As the cutter blade is
sharp, care should be
taken not to injure
yourself while cleaning.
To Next Page
Loading...
Need help?
General
