Page 26
4. Technical annex
If you would like to integrate counter readings for label printers into your network
management software, you have the option of the following MIB commands and trap
specifications.
4.1. SNMP/MIB commands
This is an excerpt from the SNMP specification for label printers
15
th
edition: 14 November 2016:
The following printer models can be equipped with SNMP/MIB support.
B-EP2
B-EP4
B-FP3D (SNMP v1/v2c)
B-EV4
B-FV4
B-SA4
B-850-R
B-SX4T
B-SX5T
B-SX6T
B-SX8T
B-EX4T
B-EX4D
B-EX6T
The ‘bcpCounterTable’ contains counter information as well as the following specific
entries:
• bcpCounterTotalFeed
• bcpCounterFeed
• bcpCounterPrint
• bcpCounterFeedCharge1 (Note: the unit of measurement is in cm!)
• bcpCounterFeedCharge2 (Note: the unit of measurement is in inches!)
Note:
The SNMP function in some label printers can be activated and deactivated
separately in the LAN settings in the printer menu. The following must be activated:
B-SA, B-852, B-SX, B-EX
To Next Page
Loading...
