1-9
Figure (8)
Approved Ribbons
The following ribbons approved should be used.
The manufacturer ink name of the ribbon must not be revealed, and handled carefully.
NOTE
The asterisk (*) in the above table indicates a number corresponding to the ribbon
width.
*1. This cannot be used when a serial bar code is printed, and print density should be
lower at 40 degree.
*2. This cannot be used when a serial bar code is printed at 5 inch per sec.
Ribbon model name Brand
TR45 Fuji-Copian
DW-350 DNP
AWR-470 * ARMOR
B-110A RICOH
B-110C RICOH
TR4085 Sony Chemical
TR4065 * Sony Chemical
TR4070 Sony Chemical
Core
To Next Page
Loading...
