3-13
3.9 Replacing the Print Head Ass’y
1. Press right concave of the print head bracket and use a flat screwdriver to
stick right side of the printer head bracket then pick up the print head ass’y.
2. Disconnect print head harnesses.
3. Reassemble parts in reverse procedures.
Print Head
Ass’y
CAUTION!
1. NEVER touch the element when handling the Print Head Ass’y.
2. NEVER touch the connector pins to avoid a breakdown of the Print Head by static
electricity.
Bracket Concave
Stick Flat
Screwdriver Here
To Next Page
Loading...
