Toshiba B-SV4T SERIES - Install the Cutter Module (Option: B-SV204-QM

4-5
4.3 Install the Cutter Module (Option: B-SV204-QM-R)
1. Upside down the printer to remove two screws of hinge holder in the lower cover
ass’y.
2. Remove the screw that fixes the memory module cover.
Screw of
hinge holder
Screw of
hinge holder
Memory
module Cover
1. Be sure to turn OFF the power before removing the Cutter Cover.
2. Care must be taken not to in
j
ure
y
our fin
g
ers b
y
the cutter blade.
WARNING
!
Screw