Toshiba BMS-CT2560U-E - Monitor Overall Air Conditioning System

Touch Screen Controller Owner's Manual
49
-EN
To check the operation status of the overall air conditioning system, tap / to display the batch ON/OFF screen.
To check the malfunction occurrence status, tap / to display the check code screen.
* The number of Air to Water Heat Pumps (ATW) of the hot water supply function is not included.
Monitor the Overall Air Conditioning System
No. Functions
1
Displays the overall number of operating units as ON/OFF meters and numerical values. *
2
Displays the number of units for each operation mode. The upper row shows the number of units in operation and the lower row shows
the number of units stopped. *
If there is ON/OFF unit, it is displayed in [
2-(1)].
3
You can change the operation status of the overall air conditioning system. (P.34)
For the Option settings, see step 3 on (P.38).
4
Tap to close the batch ON/OFF screen.
● NOTE
You can also tap / to close.
5
The check code, check content, notice code, notice content, occurrence location, and occurrence time are displayed.
6
Stop operation of all air conditioners and ON/OFF unit where check codes are displayed and erase the check code (s).
● NOTE
For some ON/OFF unit, only the operation stops, and the check code (s) are not erased.
7
Stop the applicable air conditioner(s) or ON/OFF unit and erase the check code (s).
● NOTE
For some ON/OFF unit, only the operation stops, and the check code (s) are not erased.
8
Tap to close the check code screen.
● NOTE
You can also tap / to close.
6
5
8 43
2
1
7
2
-(1)
2
-(1)
■ Batch ON/OFF screen ■ Check code history screen