Toshiba BMS-CT2560U-E - Set Check Code Email Destination

Touch Screen Controller Owner's Manual
88
-EN
You can set the email address to send email to when an error occurs.
● NOTE
Up to five email addresses can be set.
● NOTE
To test-send to the registered email address, tap [Test transmission], which displays after you tap [OK].
Set check code email destination
1 Tap [1-(2)] with [1-(1)] (P.81)
2 Tap the address field to register
3 Enter the email address on the keyboard, then tap [3-(1)]
● NOTE
• Tap [Shift] to toggle between upper case letters and lower case letters, and
numbers and symbols.
• Tap to delete one character.
4 Tap [OK]
1
-(1)
1
-(1)
1
-(2)
1
-(2)
3
-(1)
3
-(1)