Toshiba BMS-CT2560U-E - Output Data to a USB Memory Stick; Restart the Unit; Exit the System

Touch Screen Controller Owner's Manual
80
-EN
You can output data for Energy Report Software 2 to a USB memory stick.
1 Connect the USB memory stick to the slot in the Unit
2 Tap [Output to USB memory] in the [Functions] menu (P.76)
3 Tap [OK]
● NOTE
If the USB memory stick is not connected, [OK] will not be enabled.
You can restart the Unit.
The schedule is not executed during restart.
1 Tap [System reboot] in the [Functions] menu (P.76)
2 Tap [OK]
Terminate the operation of the Unit.
● NOTE
This function turns off the power to the System Controller.
It does not stop the air conditioners connected to the Unit.
Output data to a USB memory stick
Restart the unit
Exit the system
1 In [1-(1)], tap [1-(2)]
2 Tap [2-(1)]
2
-(1)
2
-(1)
1
-(1)
1
-(1)
1
-(2)
1
-(2)