24 - English
System Setup
5
When the auto scanning is complete, the current
time and date will be displayed automatically.
6
Check the date and time.
• if it is: Correct
Press OK button then the data and time
will be saved.
• if it is: Incorrect
Refer to “Setting the Date and Time”
(see page 25) menu, when you want to
change the date and time.
Plug & Auto Setup
The DVD Recorder & VCR will automatically set itself
up when it is plugged into the mains for the first time.
TV stations will be stored in memory. The process takes
a few minutes. The DVD Recorder & VCR will then be
ready for use.
1
Connect the RF cable as indicated on page 18.
• Connecting Your DVD Recorder & VCR to the
TV using the RF Cable.
2
Plug the DVD Recorder & VCR into the mains.
• “Auto” in the front panel display flickers.
3
Start the auto setup.
4
Start the auto scanning.
Auto Setup
OK RETURN
Auto setup wil be started.
Check antenna and
TV cable connection.
Auto Setup
RETURN
Please wait
Scanning... 10%
Clock Set
MOVE OK RETURN
Time
Date
Auto clcok
12 : 00 01 / JAN / 2005 SAT On
VR25SB-1-eng 5/6/05 5:33 PM Page 24
To Next Page
Loading...
