34 - English
System Setup
VCR Setting
If you want your videotapes to play automatically when
you insert them, turn on Auto Play.
1
With the unit in Stop mode/No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the OK or √ button.
3
Press the …† buttons to select System, then
press the OK or √ button.
4
Press the …† buttons to select VCR, then press
the OK or √ button.
Only tapes that are missing the Record Safety
Tab will play automatically when inserted.
Note
❚
About the Change Level
1
Press the …†buttons to select Change
Password, then press the OK or √ button.
2
Enter the 4-digit password using the 0 to 9
buttons on the remote control.
•
The ‘Confirm the password.’ message will be
displayed.
3
Enter your password again using the 0 to 9 but-
tons on the remote control.
Press the RETURN or œ button to return to the
previous menu. Press the MENU button to exit
the menu.
Note
No Disc System
VCR
√√
DVD EP Mode Time : 6 Hours
√√
Chapter Creator : Off
√√
Front Display : Automatic
√√
NICAM : On
√√
Video Output :
Component
√√
MOVE OK RETURN EXIT
Programme
Setup
No Disc
VCR
Tape Length : E180
√√
Auto Play : On
√√
Auto Repeat : Off
√√
IPC : On
√√
Colour System : Automatic
√√
MOVE OK RETURN EXIT
Programme
Setup
No Disc Parental Control
MOVE OK RETURN EXIT
Programme
Setup
Password : On
√√
Rating Level : Level 1 kids
√√
Change password
√√
No Disc Change Password
NUMBER OK RETURN EXIT
Programme
Setup
Enter the password
No Disc Change Password
NUMBER OK RETURN EXIT
Timer Rec.
Setup
Confirm the password
No Disc Setup
System
√√
Clock Set
√√
Install
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
MOVE OK RETURN EXIT
Programme
Setup
VR25SB-1-eng 5/6/05 5:33 PM Page 34
To Next Page
Loading...
