English - 37
System Setup
Front Display
Adjust the brightness of the unit’s front panel display.
1
With the unit in Stop mode/No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the OK or √ button.
3
Press the …† buttons to select System, then
press the OK or √ button.
4
Press the …† buttons to select Front Display,
then press the OK or √ button.
5
Press the …† buttons to select the desired item,
then press the OK or √ button.
• Automatic – Front Panel Display will dim auto-
matically during power off.
• Bright – Front Panel Display will be bright all the
time.
• Dim – Front Panel Display will be dim all the
time.
No Disc System
VCR
√√
DVD EP Mode Time : 6 Hours
√√
Chapter Creator : Off
√√
Front Display : Automatic
√√
NICAM : On
√√
Video Output :
Component
√√
MOVE OK RETURN EXIT
Programme
Setup
Automatic
Bright
Dim
No Disc Setup
System
√√
Clock Set
√√
Install
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
MOVE OK RETURN EXIT
Programme
Setup
7
Press the REC button to start recording.
The message "Do you want to create the chapter
menu after this recording?" is displayed.
8
Press the œ√buttons to select Yes and press
the OK button and recording begins.
In XP and SP mode, you must record at least 5
minutes to create a chapter. In LP and EP mode,
15 minutes.
9
Press the STOP button to stop recording.
10
To display the created titles, finalise the disc
(see page 85) and then press the TOP MENU
button. The title menu will be displayed.
11
To display the created chapters, select the
desired Title and then press the DISC MENU
button. The chapter menu for the selected Title
will be displayed.
On DVD-RW discs, additional chapters and
titles can be added to a finalised disc by
unfinalising and recording again. On DVD-RW
discs, once finalised, no additional chapters or
titles can be recorded.
Note
The Automatic Chapter Creator function does
not work during Timer Recording or when you
turn the power off.
The DVD-R disc cannot be unfinalised.
CAUTION
VR25SB-1-eng 5/6/05 5:33 PM Page 37