EasyManua.ls Logo

Toshiba D-VR25SB - VCR Recording Basics; Basic VCR Recording Steps; Special VCR Playback Features; Tracking Adjustment

Toshiba D-VR25SB
93 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 65
Recording
Basic VCR Recording
Before starting
1. Check TV channel and Antenna connections.
2. Check the remaining time on the tape.
You can record a TV show in progress by inserting a
blank tape and pressing the
(REC) button. You can
even add recording time from 30 minutes up to 9 hours
by pressing the
(REC)button repeatedly.
1
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the
entire programme.
2
Press VCR button to select the VCR mode.
3
Press the 0–9 buttons or the PROG/TRK ( / )
buttons to select the desired channel.
Press the INPUT SEL. button to select AV1, AV2
or AUX if recording from an external
device connected to the front or rear inputs,
respectively.
4
Press the REC SPEED button on the remote
control to set the Record Speed to one of the
following options:
SP Standard Play, for best picture quality.
LP – Long Play, for maximum recording time
(3 times SP).
Be sure your videotape has a Record Safety Tab.
If the tab is missing, you can cover the opening
with a small piece of tape.
Warning: Do not cover this opening unless you
are sure you want to record over the tape.
Note
CAUTION
The selected Record Speed will appear on the
front panel display and on-screen display.
This unit only supports PAL input signal.
Note
4
Press the …† button to select the number of the
scheduled record list you want to delete, and then
press the OK button.
• The Edit and Delete items are displayed.
5
Press the …† button to select Delete, then press
the OK or button.
• You will be prompted with the delete confirm
message such as “Do you want to delete
‘No.01’?”.
6
Press the œ buttons to select Yes, then press
the OK button.
• The selected title will be deleted from the list.
7
Press the MENU button after finishing the
operation. The menu screen will disappear.
You can not delete programmes that are
currently recording.
This unit only supports PAL input signal.
Note
RETURNOKMOVE EXIT
Scheduled Record List
DVD-RAM(VR)
01 DVD AV1 SAT01 11:00 13:00 SP
--
02 DVD AV1 SAT01 09:22 10:30 SP
--
03
--
---
--
/
--
--:-- --:-- -- --
04
--
---
--
/
--
--:-- --:-- -- --
05
--
---
--
/
--
--:-- --:-- -- --
06
--
---
--
/
--
--:-- --:-- -- --
No. To PR Day Start End Speed V/P Edit
Edit
Delete
RETURNOKMOVE EXIT
Scheduled Record List
DVD-RAM(VR)
01 DVD AV1 Daily 11:00 13:00 SP Off
02 DVD 01 Daily 09:22 10:30 SP Off
03
--
---
--
/
--
--:-- --:-- -- --
04
--
---
--
/
--
--:-- --:-- -- --
05
--
---
--
/
--
--:-- --:-- -- --
06
--
---
--
/
--
--:-- --:-- -- --
No. To PR Day Start End Speed V/P Edit
No. 01
Do you want to delete ‘No. 01’?
NoYes
VR25SB-2-eng 5/6/05 5:43 PM Page 65

Table of Contents

Related product manuals