Toshiba D-VR25SB - Recording Methods; One Touch Recording (OTR); Timer Recording Setup

62 - English
Recording
Making a Timer
Recording
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
4. Ensure the disc or tape has available space for recording.
Otherwise, the recording will not be made or will be
recorded partly only.
Make sure the Clock (Setup-Clock Set) must be set before
you proceed with a timer recording. (See page 25)
1
Press the OPEN/CLOSE button, and place a recordable
disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel
display.
3
With the unit in Stop mode, press the MENU
button.
4
Press the …† buttons to select Programme,
then press the OK or √ button.
5
Press the OK or √ button twice.
• The Timer Recording screen is displayed.
6
Fill in the items using the …†œ √ buttons.
œ √ : Moves to the previous/next item,
…† : Sets a value.
• To : Select the media to record DVD or VCR.
• PR : The video input source (AV 1, AV 2 or
AUX), or the broadcasting channel you
want to make a timer recording from.
• Day : Set the recording day.
Daily, MO-SA, MO-FR, W-SA, ...W-SU,
MON01, ...WED31
• Start/End Time : Start and end time of the timer
recording.
RETURN
OK
MOVE
EXIT
Programme
DVD-RAM(VR)
Standard Timer
√√
Disc Navigation
Playlist
Disc Manager
Copy
Programme
Setup
RETURNOKMOVE EXIT
Scheduled Record List
DVD-RAM(VR)
01 DVD AV1 Daily 11:00 13:00 SP Off
√√
02 DVD 01 Daily 09:22 10:30 SP Off
√√
03 -- --- -- / -- --:-- --:-- -- --
√√
04 -- --- -- / -- --:-- --:-- -- --
√√
05 -- --- -- / -- --:-- --:-- -- --
√√
06 -- --- -- / -- --:-- --:-- -- --
√√
No. To PR Day Start End Speed V/P Edit
No. 01
To PR Day Start End Speed V/P
DVD AUX SAT01 11:00 13:00 SP Off
Recordable Time 01:23 SP
Making a One Touch
Recording (OTR)
One-Touch Recording (OTR) allows you to add
recording time from 30 minutes up to 9 hours by press-
ing the REC button:
• 30-minute increment up to 4 hours
• 1-hour increment from the 4th hour to 9 hours
1
Press the PROG/TRK ( / ) buttons or num-
ber buttons to select the programme to record.
If you want to record through a connected external
component, press the INPUT SEL. button to select
an appropriate external input (AV1, AV2, AUX or
DV).
2
Press the REC button.
3
While in Record mode, press the REC button
again to activate One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen
Display and the DVD Recorder & VCR will record
for exactly 30 minutes.
4
Continue pressing REC to add recording time from
30 minutes to 9 hours.
• The DVD Recorder & VCR stops recording auto-
matically when the time has elapsed.
❚
To stop recording
Press the STOP () button.
The message “Press STOP button once more to
cancel Timer Record” is displayed.
Press the STOP () button again.
The message “Updating the Information of disc.
Please wait for a moment” is displayed.
■
The timer counter decreases by minute to
0:00, then the DVD Recorder & VCR stops
recording.
Note
VR25SB-2-eng 5/6/05 5:43 PM Page 62