English - 25
System Setup
4
Press the œ √ buttons to select the hour, minutes,
day, month and year.
• The option selected highlight.
5
Press the …† buttons to increase or decrease the
value.
• The day of the week is displayed automatically.
• You can hold the …† buttons down to scroll
more quickly through the values.
❚
Setting the clock Automatically
6
Press the œ √ buttons to select Auto Clock.
Press the …† buttons to select On.
7
Press the OK button, then the date and time will
be saved. If you don’t press the OK button, it will
not be saved.
8
Press the MENU button to exit the menu.
Setting the Date and
Time
Your DVD Recorder & VCR contains a 24-hour clock
and calendar used to:
• Automatically stop programme recording
• Preset your DVD Recorder & VCR to record a
programme automatically
• You must set the date and time when you purchase
the DVD Recorder & VCR
• Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1
With the unit in Stop mode/No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the OK or √ button.
3
Press the …† buttons to select Clock Set, then
press the OK or √ button.
No Disc Programme
Standard Timer
√√
MOVE OK RETURN EXIT
Programme
Setup
No Disc Setup
System
√√
Clock Set
√√
Install
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
MOVE OK RETURN EXIT
Programme
Setup
No Disc Clock Set
MOVE OK RETURN EXIT
Programme
Setup
■ You must have the aerial connected to set
the Auto Clock. Connecting the RF Cable on
page 18.
■ If you set “Auto Clock” to “On”, the Auto
Clock set function is activated whenever the
DVD Recorder & VCR is turned off.
The time is adjusted automatically by making
reference to the time signal from the station.
Note
Time
Date
Auto clcok
12 : 00 01 / JAN / 2005 SAT On
No Disc Clock Set
MOVE OK RETURN EXIT
Programme
Setup
Time
Date
Auto clcok
12 : 00 01 / JAN / 2005 SAT On
VR25SB-1-eng 5/6/05 5:33 PM Page 25
To Next Page
Loading...
