68 - English
Recording
5
You can use the
√
II
,
I
œœ
or
√√
I
,
œœ
or
√√
buttons to search for the end position.
Press the OK button at the end point.
• A copylist will be generated.
Repeat the above steps to create the copylist.
• In VCR mode, the copylist cannot be saved.
6
Press the …† buttons to select desired copylist,
then press the OK or √ button.
7
Press the …† buttons to select Copy, then press
the OK or √ button.
• The VCR will fast forward, searching for a start
position and then automatically start a copy.
• It may not be match up with Start and END point
exactly.
• If you want to copy all copylists, select Copy All.
❚
Direct copy VCR to DVD
• Insert the VHS tape you want to copy.
• Insert Recordable DVD disc.
• Press DVD copy button on the remote control or
TO DVD button on the front panel.
• To stop recording press the STOP button.
RETURNOKMOVE EXIT
VCR - -> DVD
DVD-RAM(VR)
No. Start End Edit
00:01:07
PLAY
01
00:00:21 00:01:04
√√
02
--:--:-- --:--:--
√√
Copy All
RETURNOKMOVE EXIT
VCR - -> DVD
DVD-RAM(VR)
No. Start End Edit
00:00:21
RPS
01
00:00:21 00:01:04
√√
02
--:--:--
--:--:--
√√
Copy All
RETURNOKMOVE EXIT
VCR - -> DVD
DVD-RAM(VR)
No. Start End Edit
00:01:10
PLAY
01
00:00:21 00:01:04
√√
02
--:--:--
--:--:--
√√
Copy All
Play
Copy
Delete
❚
To copy from VCR to DVD
1
With the unit in Stop mode, press the MENU
button in stop mode.
2
Press the …† buttons to select Copy, then press
the OK or √ button.
3
Press the …† buttons to select VCR-->DVD, then
press the OK or √ button.
4
You can use the
√
II
,
I
œœ
or
√√
I
,
œœ
or
√√
buttons to search for the Start position.
Press the OK button at the start point.
RETURNOKMOVE EXIT
Copy
DVD-RAM(VR)
DVD - -> VCR
√√
VCR - -> DVD
√√
Disc Navigation
Playlist
Disc Manager
Copy
Programme
Setup
RETURNOKMOVE EXIT
VCR - -> DVD
DVD-RAM(VR)
No. Start End Edit
00:00:10
STOP
01
--:--:-- --:--:--
√√
Copy All
RETURNOKMOVE EXIT
VCR - -> DVD
DVD-RAM(VR)
No. Start End Edit
00:00:30
Play
01
00:00:21
--:--:--
√√
Copy All
VR25SB-2-eng 5/6/05 5:43 PM Page 68
To Next Page
Loading...
