11
© February 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO166/206
DRUM RELATED SECTION
11 - 13
[F] Main charger cleaner
[G] Needle electrode
(1) Take off the main charger.
" P.11-12 "[D] Main charger"
(2) Release the hook of the cleaning shaft. Then
rotate the shaft at 90 degrees to take it off.
Fig. 11-17
(1) Take off the main charger grid and main
charger cleaner.
" P.11-12 "[E] Main charger grid"
" P.11-13 "[F] Main charger cleaner"
(2) Take off the terminal covers of both front and
rear sides.
Fig. 11-18
(3) Remove the terminal and spring. Then take
off the needle electrode.
Notes:
1. Do not touch the needle electrode directly
with bare hands.
2. Make sure not to hold or bend the needle
electrode.
Fig. 11-19
Main charger cleaner
Terminal cover
Needle electrode
Terminal
Spring
To Next Page
Loading...
