e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
DRUM RELATED SECTION
11 - 14
[H] Drum
[I] Drum cleaning blade
(1) Take off the main charger.
" P.11-12 "[D] Main charger"
(2) Rotate the lever while pushing its latch and
pull it out.
(3) Take off the drum.
Notes:
1. Be careful not to touch, spit or scratch the
drum surface.
2. Avoid direct light. Place the drum in a
dark place immediately after taking off.
3. Be careful not to touch or scratch the
edge of the cleaning blade.
Fig. 11-20
(1) Take off the drum.
" P.11-14 "[H] Drum"
(2) Remove 2 screws and take off the drum
cleaning blade.
Note:
Be careful not to touch or scratch the edge of
the drum cleaning blade.
Fig. 11-21
Drum
Lever
Drum cleaning blade
To Next Page
Loading...
