e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
DEVELOPMENT SYSTEM
12 - 18
[G] Mixer
(14) Remove the seal on the front side. Remove 1
E-ring and 1 bushing.
Fig. 12-25
(15) Take off the developer sleeve.
Fig. 12-26
(1) Take off the developer sleeve.
" P.12-14 "[F] Guide roller / Developer
sleeve"
(2) Take off the doctor sleeve.
Fig. 12-27
Seal
Bushing
E-ring
Developer sleeve
Doctor sleeve
To Next Page
Loading...
