7 TopAccess Administrator Mode
164 Setting up from TopAccess
4
Select “Import” and click [Previous] to close the Security Service
page.
5
Before enabling SSL, you must input the password for the imported
server certificate from the touch panel of the equipment.
For instructions on how to input the password, please refer to the following section in
User Functions Guide.
Chapter 4 “SETTING ITEMS (ADMIN)”
- “SETTING NETWORK FUNCTIONS”
- “Setting the User Certificate”
6
Then you can enable SSL for the following network settings.
P.148 “Setting up the HTTP Network Service”
P.155 “Setting up the FTP Server”
P.197 “Setting up the IPP Print”
Deleting an imported server certificate
1
Click [Security Service].
y The Security Service page is displayed.
To Next Page
Loading...
