Maintaining from TopAccess 233
Rebooting the Equipment
An administrator can reboot the equipment
Rebooting the equipment cannot be performed when there are jobs in progress.
Rebooting the equipment
1
Access TopAccess in the administrator mode.
P.122 “Accessing TopAccess Administrator Mode”
2
Click the Maintenance menu and Reboot submenu.
y The Reboot submenu page is displayed.
3
Click [Reboot] to reboot the equipment.
y The confirmation dialog box appears.
4
Click [OK].
y The equipment is restarted.
During the equipment is restarted, the network will not be available. TopAccess will dis-
play “Please restart after waiting a few minutes.”. During the equipment is restarted, the
Touch Panel Display will display “NETWORK INITIALIZING”. When this “NETWORK INI-
TIALIZING” message disappears, TopAccess will once again be available.
To Next Page
Loading...
