Setting up from TopAccess 193
Setting up the Raw Job Setting
In Raw Job Setting, you can add up to 16 LPR queue names and specify the raw job setting for
each queue. These queue names can be used when printing without a printer driver, such as
printing from UNIX workstation.
You can add, edit, or delete a LPR queue.
P.193 “Adding or Editing a LPR queue”
P.195 “Deleting a LPR queue”
Adding or Editing a LPR queue
1
To add a new LPR queue, click [Add] in Raw Job Setting.
To edit an existing LPR queue, select a radio button of a queue that
you want to edit and click [Edit].
y The Add New LPR Queue page is displayed.
To Next Page
Loading...
