Setting up User Management 287
4
Select “MFP Local Authentication” drop down box, and select how
invalid jobs are processed in the “User Authentication Enforce-
ment” drop down box. Then click [Next].
y The confirmation dialog box appears.
If you want to enable the guest user operations, select the “Enable Guest User” check
box. Go to the next step.
5
Click [OK].
6
Select “MFP Local Authentication” drop down box, and select how
invalid jobs are processed in the “User Authentication Enforce-
ment” drop down box. Then click [Next].
y In the “User Authentication Enforcement” drop down box, select whether invalid jobs,
which an authentication failed, are printed or stored in the invalid job list.
- ON — Select this to not print the invalid jobs and store them in the invalid job list.
- Print — Select this to print the invalid jobs.
- Delete — Select this to delete the invalid jobs without storing them in the invalid
job list.
y If you want to automatically register user information entered in the authentication
screen on the touch panel, TopAccess, or e-Filing Web Utility into this equipment,
enable the department management and then check the “Create User Information
Automatically” checkbox.
y You can disable the User Management Setting by selecting “Disable” and click [Next].
To Next Page
Loading...
