106
3.SETTING OF BASIC COPY MODES
4.Selecting Finishing Modes (Cont.)
3
4
Press the [FRONT STAPLE SORT] (or [DOUBLE STAPLE SORT] or
[REAR STAPLE SORT]) button.
• For the Hanging Finisher (MJ-1022), only the [FRONT STAPLE SORT] button can be selected.
• Set other copy modes as required.
5
Press the [START] button.
If the paper quantity exceeds the maximum number of sheets that can be stapled, the Finisher automatically
enters the sort mode.
Maximum number of sheets for stapling
• For the tray loading capacity, see P.355 “2.Specifications of Options”
• Two covers of 17 lb. Bond to 110 lb. Index can be added. In this case, the covers are included in the
maximum number of sheets that can be stapled.
Saddle Stitch Finisher (MJ-1024)/Multi Position Staple Finisher (MJ-1023)/Finisher (MJ-1101)
*1 Maximum number of sheets for stapling when plain paper and thick 1 are mixed is the same as that of
thick 1.
Hanging Finisher (MJ-1022)
Only plain paper (17 to 20 lb. Bond) can be used.
Paper size Paper type (weight)
Qty.
*1
LT Plain paper (17 - 20 lb. Bond) 50 sheets
Thick 1 (21 - 28 lb. Bond) 30 sheets
LD, LG, LT-R, COMP Plain paper (17 - 20 lb. Bond) 30 sheets
Thick 1 (21 - 28 lb. Bond) 15 sheets
Paper size Qty.
LT, LT-R 30 sheets
LG 20 sheets
LD, COMP 15 sheets
To Next Page
Loading...
