25
1
Configuration of options
1. Original Cover (KA-3511PC)
Holds an original.
2. Reversing Automatic Document Feeder (MR-3018)
Automatically feeds a placed stack of originals one by one to have them copied.
3. Bridge Unit (KN-3511A)
Acts as a relay for the finisher and this equipment.
4. Large Capacity Feeder (KD-1012)
This feeder enables you to feed up to 2500 sheets (20 lb. Bond) of LT paper.
5. Paper Feed Pedestal (KD-1011)
Adds one drawer to the equipment. This also enables you to install the Additional Drawer Module (MY-
1021) (optional).
6. Additional Drawer Module (MY-1021)
This drawer is for adding to the Paper Feed Pedestal (KD-1011). Combined with the 2 drawers in the
equipment, paper can be fed from 4 drawers in total.
7. Finisher (MJ-1101)
This finisher enables sort/group finishing and stapling. The Hole Punch Unit (optional, MJ-6101) can
be installed to this finisher. The Bridge Unit (optional, KN-3511A) is required for the installation of this
finisher.
10
7
9
8
3
4 5 6
1
11 12
2
To Next Page
Loading...
