142
5.USING THE EDITING FUNCTIONS
1.IMAGE SHIFT (Cont.)
5
Creating a bookbinding margin
This is used when setting “Book-type original -> 2-sided copy” ( P.119) in duplex copying. The margin is
created in the center (inner margin).
• Acceptable paper sizes for this function is LT only.
1
Press the [EDIT] button to enter the edit menu, and then press the
[IMAGE SHIFT] button.
2
Press the [BOOK] button.
3
Adjust the margin width by pressing the [2 mm] or [30 mm] button,
and then press the [ENTER] button.
• The default width of the margin is 14 mm (0.551").
To Next Page
Loading...
Need help?
General
