128
4.IMAGE ADJUSTMENT
4
1. Color Balance (YMCK Adjustment)
This function allows you to adjust an overall color balance of the copied image by changing each toner
amount of yellow (Y), magenta (M), cyan (C) and black (K).
• This function is available only in the full color mode.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press the [IMAGE] button to enter the image menu, and then press the
[COLOR BALANCE] button.
4
Press the or button of the color to obtain the desired color bal-
ance. Then press the [ENTER] button.
• “0” is the standard setting.
• Pressing the button strengthens the adjusted color, and pressing the button weakens it.
• Select other copy modes as required.
5
Press the [START] button.
Canceling the color balance adjustment
Move the indicator of the color whose adjustment you want to cancel its adjustment to 0 by your
pressing the or button, and then press the [ENTER] button.
If you want to cancel the adjustment of all colors, press the [DEFAULT] button, and then press the
[ENTER] button.
To Next Page
Loading...
