17
During maintenance or inspection
Warning
• Never attempt to repair, disassemble or modify the Multifunctional Digital Color Systems by yourself.
You could cause a fire or get an electric shock.
Always contact your Service representative for maintenance or repair of the internal parts of the Multi-
functional Digital Color Systems.
• Do not let liquids such as water and oil get into the system when cleaning the floor. This could cause a
fire and give you an electric shock.
Caution
• Always keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This could
cause a fire and give you an electric shock due to the heat released by electric leakage.
• Do not touch the stapling area. The actual needle point could cause you personal injury.
Saddle Stitch Finisher (optional)  P.327
Finisher (optional)  P.320
Other points
• Do not use such solvents as thinner or alcohol when cleaning the surface of the Multifunctional Digital
Color Systems.
- This could warp the shape of the surface or leave it discolored.
- When using a chemical cleaning pad to clean it, pay attention to any cautionary points.
To Next Page
Loading...
Need help?
General
