Toshiba E-studio 281c - E-Studio281 C;351 C;451 C Specifications

352
12.SPECIFICATIONS & OPTIONS
12
1. e-STUDIO281c/351c/451c Specifications
Model name FC-281C/FC-351C/FC-451C
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fixing method Heat roller + belt fusing (Twin separated IH coil)
Photosensor type OPC
Original scanning system Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed
scanning system by feeding the original)
Original scanning sensor Linear CCD sensor
Scanning light source Xenon lamp
Resolution Scanning 600 dpi x 600 dpi
Writing Black-and-white: 2400 dpi x 600 dpi (Smoothing process),1 bit Color,
Image smoothing: 600 dpi x 600 dpi, 8 bits
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. LD
Acceptable copy
paper size
Drawer LD, LG, LT, LT-R, ST-R, COMP, 13" LG, 8.5" SQ, 8K, 16K, 16K-R,
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
Bypass Paper size within 5 1/2" - 12" (Length), 8 1/2" - 18" (Width)
Acceptable copy
paper weight
Drawer 17 - 28 lb. Bond
Bypass 17 - 55 lb. Bond or 17 lb. Bond - 110 lb. Index
Warm-up time Approx. 40 seconds
First copy time (LT portrait) Black-and-white: Approx. 6.8, Color: 16.2 seconds or less
Continuous copy speed See  P.354 “Continuous copying speed”.
Multiple copying Up to 999 copies (digital key entry)
Excluded image
width
Black-and-
white
Leading edge: 0.12"±0.08", Trailing edge: 0.12"±0.08",
Both edge: 0.08"±0.08"
Color Leading edge: 0.20"±0.08", Trailing edge: 0.20"±0.08",
Both edge: 0.08"±0.08"
Printer
(Black-and-
white/Color)
Leading edge: 0.20"±0.08", Trailing edge: 0.20"±0.08",
Both edge: 0.20"±0.08"
Reproduction ratio Actual size 100±0.5%
Zoom 25 - 400% (in 1% increments)
For the Reversing Automatic Document Feeder 25 - 200%
(in 1% increments)
Paper supply Drawer Approx. 550 sheets (20 lb. Bond)
Bypass Approx. 100 sheets (20 lb. Bond)
Toner density adjustment Black (K): Magnetic auto-toner system
Yellow (Y)/Magenta (M)/Cyan (C): Optical auto-toner system
Exposure control Automatic plus manual selection from 11 exposure step
Environment (for normal use) Temperature: 10 - 30 ºC (50 º - 86 ºF), Humidity: 20 - 85% (No Con-
densation)
Power requirements AC 115 V±10%, 12 A (50/60 Hz)
Power consumption 1.5 kW or less (including optional equipments)