108
3.SETTING OF BASIC COPY MODES
4.Selecting Finishing Modes (Cont.)
3
1
Place paper in the drawer(s).
2
Select the paper size.
• Available copy paper sizes are LD, LT-R and LG.
• For bypass copying, see P.75 “3.Bypass Copying”.
To use the saddle stitch mode for LD or LG-size paper, lift the stopper of the saddle stitch tray.
3
Place the original(s).
• When placing originals on the Reversing Automatic Document Feeder, see the illustrations ( P.107) for the
proper page order of the copies.
• When placing originals on the original glass, follow the procedure below.
- When [MAGAZINE SORT] or [MAGAZINE SORT & SADDLE STITCH] is selected: Place the first page of
the originals first.
- When [SADDLE STITCH] is selected: In case of 12-page originals, set them in the order of pages 12-1, 2-
11, 10-3, 4-9, 8-5, then 6-7.
4
Press the finisher button on the basic menu.
To Next Page
Loading...
