152
5.USING THE EDITING FUNCTIONS
5.2IN1 / 4IN1 (Cont.)
5
5
Press the [1 SIDE] (or [2 SIDE]) button.
• Select other copy modes as required.
6
Press the [START] button.
• When the Reversing Automatic Document Feeder (optional) is used, the original is scanned and copying
starts.
• When the original is placed on the original glass, perform steps 7 and 8.
7
Place the next original, and press the [START] button.
• Data scanning of this original starts.
• The next original will also be scanned in the same manner when you press the [YES] button on the touch
panel, and then press the [START] button on the control panel.
• Repeat this step until all the originals have finished being scanned.
8
After all the originals have finished being scanned, press the [FIN-
ISHED] button.
• Copying starts.
To Next Page
Loading...
