199
6
1
Select the document to be printed according to steps 1 to 4 of
P.195 “Printing the whole document”.
2
Press the [SETTINGS] button.
3
Set the printing modes as required.
• See the eight items mentioned above for the setting mode. To set items 3 to 8, press the button and set the
required setting on the menu.
4
Press the [PRINT] button.
• Printing starts.
To stop printing a stored document during this operation
Select the job you want to stop from the print job menu or scan job menu, and then press the
[DELETE] button. For details, see P.239 “8.JOB STATUS”.
To Next Page
Loading...
