26
4.CONNECTING TO THE DEVICE
4
1. CONNECTING TO THE PARALLEL PORT
The following describes how to connect this equipment to a computer using a printer cable (so-called
“parallel connection”).
The IEEE 1284 compatible printer cable is an optional item. Please obtain one that is compatible with your
computer.
1
Turn OFF the power of this equipment and
the power of the computer.
2
Insert the printer cable all the way to the
deep end of the parallel interface
connector located on the rear side of the
machine body, and secure it with the
latches on both sides of the connector.
3
Connect the other end of the printer cable
to the parallel port of your computer.
The parallel port connector may vary depending on the model of the
computer. If the printer cable compatible with your computer is
unknown, please ask the store where you purchased your
computer.
To Next Page
Loading...
