Toshiba e-STUDIO 450 - Setup Flow for Smb Printing

39
5
Setup Flow for SMB Printing
This equipment can be used with SMB printer connection that allows you to connect to this equipment using
File and Printer Sharing for Microsoft Networks service. SMB printing is the common method to setting up
the printer from the Windows 98/Me computers. However, SMB printing is not suitable for printing a large
amount of documents.
It assumes using SMB printing in a small network. If you can use the Windows NT 4.0, Windows 2000,
Windows XP, or Windows Server 2003 as a print server, it is recommended to set up for printing via
Windows print server.
"Setup Flow for Printing via Windows Print Server"  Page 43
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Set up the SMB Specify the NetBIOS name and Workgroup. If the users have to connect to this
equipment from different segment in your network, specify the WINS server
settings as well.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the SMB Protocol"
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Network Environment over TCP/IP
Setting up SMB Printer
Connection

Ð
