Toshiba e-STUDIO 450 - Setup Flow for Unix Workstation

48
5.SETUP FLOW
4.SETUP FLOW FOR PRINTING FEATURES (Cont.)
5
Setup Flow for Unix Workstation
This equipment supports printing for Unix workstations using the Unix Filters.
This equipment provides the Unix filters to print from Unix workstations. You can perform LPR printing from
the Unix workstation using the Unix filters.
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Set up the TCP/IP Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Set up the Printing
Service
Enable the LPD Printing Service using TopAccess.
Reference: Network Administrator’s Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Print Service Settings"
"Setting up the LPD Print"
Install the Client
Software
Install the Unix filters from the Admin’s Client CD-ROM and configure a print
queue.
Reference: Printing Guide
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing the Client Software for UNIX"
Unix workstation
Connecting over TCP/IP Network
Setting up the LPR
printer connection

Ð

Ð

