59
5
Setup Flow for Onramp Gateway
To enable the Onramp Gateway feature, the optional Fax unit must be installed.
This equipment can convert received faxes into E-mails and forward them to other Internet Fax devices or
client computers using Onramp Gateway transmission.
This equipment can create the ITU-T relay mailbox in which E-mail addresses are registered as end stations
to achieve the Onramp Gateway transmission. Any ITU-T compatible facsimile can send a fax to the ITU-
T relay mailbox. This equipment then forwards received faxes to the E-mail addresses registered in the ITU-
T relay mailbox.
To use this equipment as a Hub Station for the Onramp Gateway transmission, the Relay Box in which E-
mail addresses are registered must be set up. This equipment, as the distributor, can send an E-mail of any
faxes received from any ITU-T compatible facsimile device.
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Onramp Gateway
Sending a fax to the Relay Box of
the equipment through the
Public Switched Telephone network
Send a document as
Internet Fax to the Internet
via SMTP server
The Internet Fax device receives the document
from the Internet as an Internet Fax document.
The client computer receives the document
from the Internet as an E-mail document.
E-mail addresses
are assigned
to the end station
in the Relay Box
Internet
Internet Fax Device
Client Computers
SMTP Server
ITU-T compatible
G3 Facsimile
ITU-T
Relay Box
To Next Page
Loading...
