43
5
Setup Flow for Printing via Windows Print Server
When you want to manage all print jobs in the print server instead of directly printing to this equipment, the
Microsoft’s Client Server network solution is helpful. In this case, an administrator sets up the sharing printer
using LPR printing in Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003. Then clients
can install the printer driver from the Windows print server using SMB printing.
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Set up the TCP/IP Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Set up the Printing
Service
Enable the LPD Printing Service using TopAccess.
Reference: Network Administrator’s Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Print Service Settings"
"Setting up the LPD Print"
Install the Printer
Driver on the Windows
Print Server
Install the printer driver from the Client1 CD-ROM.
Reference: Printing Guide
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing Client Software for Windows"
"Installing the Client Software for LPR Printing"
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Connecting to Client Server type of Microsoft network
Setting up
the LPR connection
Setting up the SMB
printer connection
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Ð
Ð
Ð
To Next Page
Loading...
