42
5.SETUP FLOW
4.SETUP FLOW FOR PRINTING FEATURES (Cont.)
5
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Set up the TCP/IP Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Set up the DNS
(Optional)
If you want to print from the Internet, configure the DNS settings using
TopAccess to enable accessing to this equipment over the Internet. Also, if the
DNS server supports the Dynamic DNS, enable the DDNS as well.
Reference: Network Administrator’s Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Network Settings"
"Setting up the DNS Session"
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Network Settings"
"Setting up the DDNS Session"
Set up the Printing
Service
Enable the IPP Printing Service using TopAccess.
Reference: Network Administrator’s Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Print Service Settings"
"Setting up the IPP Print"
Install the Client
Software
Install the printer driver from the Client1 CD-ROM.
Reference: Printing Guide
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing Client Software for Windows"
"Installing the Client Software for IPP Printing"
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide
- Chapter 3 "PRINTING"
"Printing from Windows"
"Before Using the Printer Driver"
Ð
Ð
Ð
Ð
Ð
Ð
To Next Page
Loading...
