Toshiba e-STUDIO 450 - 3. General Copying Procedures; Initial (Default) Copy Settings

49
5
Setup Flow for FTP Printing
FTP printing allows users to send a print file using the FTP protocol from anywhere you can access to this
equipment.
This equipment supports FTP printing which enables to print a file sent through FTP protocol. Users can
send a print file using the FTP download tools to this equipment from any operating systems.
This equipment can print following files using the FTP printing:
- PCL format print job file
- PostScript Level 3 print job file
- Text data file
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Set up the TCP/IP Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Set up the Printing
Service
Enable the FTP Printing Service using TopAccess.
Reference: Network Administrator’s Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Print Service Settings"
"Setting up the FTP Print"
Connecting over TCP/IP Network
Sending a print file
using FTP

Ð

Ð
