Toshiba e-STUDIO 450 - SETUP FLOW for Topaccess

65
5
8. SETUP FLOW FOR TopAccess
Users and an administrator can remotely manage the equipment using TopAccess, web-based utility.
Once TopAccess is enabled, users can view the device information, and manage their jobs remotely from
the computer using the web browser. Also TopAccess allows users to register the address book and
templates using TopAccess.
Using an administrator’s functions of TopAccess, an administrator can set up and maintain the equipment
remotely.
To enable TopAccess, an administrator should set up the network connection between computers and this
equipment over TCP/IP, and enable the HTTP network service.
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Set up the TCP/IP Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Set up the HTTP
Network Service
Enable the HTTP Network Server.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the HTTP Network Service"

Ð

Ð
