34
5.SETUP FLOW
5
2. ABOUT SETUP
Initial Device Setup
First of all, you must set up how this equipment is managed and works as copier, printer, scanner, and
facsimile. This equipment can be used with the default settings, but some must be configured for this
equipment works properly.
"3.INITIAL DEVICE SETUP" Page 35
Setup the Network Document Processing System
This equipment is the Network-Ready MFP that can be used immediately after you connect to your network.
However, it is recommended to read following sections to make sure you choose right environments and
efficient settings for each features on this equipment even if you connect the machine to the above
environments. Also some features require configuring the settings to suit your environments.
This equipment may provide advanced document processing system in your place, if you add little more
environments in your place.
The references below are described easy-setup flow to enable each advanced document processing
features:
Setup Flow for Printing Environments
"Setup Flow for Microsoft Windows Workstation" Page 36
"Setup Flow for Macintosh Workstation" Page 46
"Setup Flow for Unix Workstation" Page 48
"Setup Flow for FTP Printing" Page 49
"Setup Flow for E-mail Printing" Page 50
Setup Flow for Scanning Environments
"Setup Flow for Scan to File" Page 52
"Setup Flow for Scan to E-mail" Page 54
Setup Flow for Fax/Internet Fax Environments
"Setup Flow for Network-Fax" Page 55
"Setup Flow for Internet Fax" Page 57
"Setup Flow for Onramp Gateway" Page 59 (Optional Fax unit required)
"Setup Flow for Offramp Gateway" Page 61 (Optional Fax unit required)
Setup Flow for e-Filing Environments
"Setup Flow for e-Filing Web Utility" Page 63
"Setup Flow for TWAIN Driver and File Downloader" Page 64
Setup Flow for TopAccess, Web-based Network Management Utility
"8.SETUP FLOW FOR TopAccess" Page 65
To Next Page
Loading...
