41
5
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Windows 2000, Windows XP, and Windows
Server 2003, and in a TCP/IP network. Even though IPP printing can be used in the local area network, this
method is commonly used to print over the Internet. If you allow IPP printing through the Internet, you must
configure the DNS server to enable users to access this equipment over the Internet using the HTTP
protocol.
This is useful when users want to print to this equipment from outside the local area network.
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Set up the TCP/IP Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Install the Client
Software
Install the printer driver from the Client1 CD-ROM.
Reference: Printing Guide
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing Client Software for Windows"
"Installing the Client Software for Peer-to-Peer Printing"
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide
- Chapter 3 "PRINTING"
"Printing from Windows"
"Before Using the Printer Driver"
Ð
Ð
Ð
Windows 2000
Windows XP
Windows Server 2003
Connecting over Internet
Setting up the IPP
printer connection
To Next Page
Loading...
