40
5.SETUP FLOW
4.SETUP FLOW FOR PRINTING FEATURES (Cont.)
5
Setup Flow for Peer-to-Peer Printing
This equipment provides the Peer-to-Peer Utility that enables a peer-to-peer connection over the TCP/IP
network. The Peer-to-Peer Utility allows users to add a Peer-to-Peer TCP/IP port by searching the
equipment in the local area network. If an administrator does not allow printer sharing in a Microsoft
network, (that means that the SMB print service is disabled), he can permit users to connect to this
equipment using the Peer-to-Peer Utility.
Peer-to-Peer utility is only available for Windows 98 and Windows Me.
Set up the TCP/IP Assign the IP address, Subnet mask, Gateway address. Also, configure the
WINS settings if your Windows network is managed with the WINS server.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Install the Client
Software
Install the printer driver from the Client1 CD-ROM.
Reference: Printing Guide
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing the Client Software for Windows"
"Installing the Client Software for SMB Printing"
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide
- Chapter 3 "PRINTING"
"Printing from Windows"
"Before Using the Printer Driver"
Setup Flow Description/Reference
Ð
Ð
Ð
Windows 98
Windows Me
Windows 98
Windows Me
Windows 98
Windows Me
Connecting over TCP/IP Network
Setting up the TCP/IP
printer connection with
Peer-to-Peer Utility
To Next Page
Loading...
