61
5
Setup Flow for Offramp Gateway
To enable the Offramp Gateway feature, the optional Fax unit must be installed.
This equipment can be used as a Hub Station to forward E-mails — from your client computer or Internet
Fax device — to any facsimile on the public switched telephone network.
For example, the document can be sent to this equipment from out of the country through the Internet, then
the document can be sent from this equipment to the designated fax number through the local public
telephone line.
When enabling the Offramp Gateway, this equipment works as an SMTP server to receive E-mails from the
Internet. To enable the STMP transmission in this equipment, the hostname (or specific domain) that
relates to this equipment must be designated using the DNS server. Then designate the MX record and
configure the SMTP server to route the E-mails received. If the hostname of this equipment is designated
as "host1.ifax.com", it is set to transfer the E-mails to this machine when an E-mail to "<account
name>@host1.ifax.com" is delivered.
Setup Flow Description/Reference
Connect this
equipment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
SMTP Server
Offramp Gateway
Internet Fax Device
Client Computer
Internet
An E-mail is set to
"FAX=<fax number>@host1.ifax.com"
from a client computer
An Internet Fax is set to
"FAX=<fax number>@host1.ifax.com"
from an Internet Fax device
An E-mail or Internet Fax is converted
to the facsimile document and sent to
<fax number> G3 facsimile
G3 Facsimile
The equipment receives
E-mail of which the forwarding
domain is "host1.ifax.com"
using SMTP transmission
via the SMTP server
The equipment receives
E-mail of which the forwarding
domain is "host1.ifax.com"
using SMTP transmission
via the SMTP server
To Next Page
Loading...
