38
5.SETUP FLOW
4.SETUP FLOW FOR PRINTING FEATURES (Cont.)
5
Set up the TCP/IP Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Set up the Printing
Service
Enable the LPD Printing Service using TopAccess.
Reference: Network Administrator’s Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Print Service Settings"
"Setting up the LPD Print"
Set up the Printing
Service (Optional)
If you want to enable the Raw TCP connection for printing, enable the Raw TCP
Printing Service using TopAccess.
Reference: Network Administrator’s Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Print Service Settings"
"Setting up the Raw TCP Print"
Install the Client
Software
Install the printer driver from the Client1 CD-ROM.
Reference: Printing Guide
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing Client Software for Windows"
"Installing the Client Software for LPR Printing"
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide
- Chapter 3 "PRINTING"
"Printing from Windows"
"Before Using the Printer Driver"
Setup Flow Description/Reference
Ð
Ð
Ð
Ð
Ð
To Next Page
Loading...
