Toshiba e-STUDIO 450 - Book-type Originals Handling; Book-type Originals Placement

45
5
Set up the TCP/IP Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Set up the IPX/SPX When you want to connect the NetWare file server over IPX/SPX, enable the
IPX/SPX protocol and select the frame type.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the IPX/SPX Protocol"
Set up the NetWare
settings
Configure the NetWare settings on this equipment.
Reference: USER FUNCTIONS GUIDE
- Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the NetWare Settings"
Set up the SLP
Session
When the NetWare file server is connected over TCP/IP, enable SLP using
TopAccess.
Reference: Network Administrator’s Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Network Settings"
"Setting up the SLP Session"
Set up the Printing
Service
Enable the NetWare Printing Service using TopAccess.
Reference: Network Administrator’s Guide
- Chapter 3 "SETTING UP FROM TOPACCESS"
"Setting up Print Service Settings"
"Setting up the NetWare Print"
Install the Client
Software
Install the printer driver from the Client1 CD-ROM.
Reference: Printing Guide
- Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing Client Software for Windows"
"Installing the Client Software for Novell Printing"
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide
- Chapter 3 "PRINTING"
- "Printing from Windows"
"Before Using the Printer Driver"
Setup Flow Description/Reference
Ð

Ð

Ð

Ð

Ð

Ð

