1 TROUBLESHOOTING FOR THE HARDWARE
12 Clearing a Paper Jam
Clearing a Paper Jam
Locating a paper jam
The equipment stops copying when the original or copy paper is jammed. Paper jams are notified on the touch panel as
follows:
The paper jam symbol helps you locate the paper jam.
1. Reversing Automatic Document Feeder (optional) (lower) ( P. 1 4)
2. Reversing Automatic Document Feeder (optional) (upper) ( P.15)
3. Fuser unit ( P.21)
4. Automatic duplexing unit ( P.19)
5. Bypass tray ( P. 1 8 )
6. Drawer feeding portion ( P. 1 7 )
7. Large Capacity Feeder ( P.17) or Paper Feed Pedestal (both optional) ( P. 1 8 )
8. Paper transport path ( P. 2 0 )
9. Job Separator, Offset Tray or Bridge Kit (all optional) ( P.23, P.24)
10. Saddle stitch unit (optional) ( P.31, P.36)
11. Finisher and Hole Punch Unit (both optional) ( P. 2 4 , P. 2 9 , P.3 3 , P. 3 4 , P.3 5 , P. 3 8)
The picture of the hardware device shown on the touch panel differs depending on the finisher options installed.
Error code
Error message
Paper jam symbols
Guidance for
clearing paper jams
1011
1
89 67
2 3 4 5
To Next Page
Loading...
