1 TROUBLESHOOTING FOR THE HARDWARE
34 Clearing a Paper Jam
Paper jam in the Hole Punch Unit of the Saddle Stitch Finisher MJ-1025 (optional)
Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
1
Separate the finisher from the equipment.
Press the lever to unlock the finisher and slowly separate it from the
equipment, placing both of your hands on the front and back of the
finisher.
2
Turn the green knob until the triangle mark ( ) falls
within the diagonal-line area on the right side of the
knob.
With the knob set in this position, the punches are up so that paper can
be released.
3
Remove the jammed paper.
4
Connect the finisher to the equipment.
Move the finisher slowly toward the equipment, placing both of your
hands on the front and the back of the finisher.
To Next Page
Loading...
