Toshiba e-STUDIO355 - Clearing a Staple Jam; Staple Jam in a Finisher

1 TROUBLESHOOTING FOR THE HARDWARE
44 Clearing a Staple Jam
Clearing a Staple Jam
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the procedure
below.
 P.44 “Staple jam in a finisher”
 P.51 “Staple jam in the saddle stitch unit”
 Staple jam in a finisher
 Finisher MJ-1101
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
3
Lower the guide while holding the knob.
A: Stapling area
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove the jammed staples.
A