1 TROUBLESHOOTING FOR THE HARDWARE
38 Clearing a Paper Jam
Paper jam in the Hanging Finisher MJ-1031 (optional)
Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
4
Close the Bridge Kit cover.
1
Separate the finisher from the equipment.
Press the lever to unlock the finisher and slowly separate it from the
equipment, placing both of your hands on the front and back of the
finisher.
2
Open the Bridge Kit cover.
3
Remove the jammed paper from the equipment side.
5
Remove the jammed paper from the paper exit
portion.
To Next Page
Loading...
